WALNUT

Milling Specs

Thickness: .75"
Widths: 2.25" - 12"
Lengths: 1-8', 1-12', 3-12', 4-14’, 6-16’
Milling Profile: Tongue and Groove Sides and Ends, Back Relief
Janka Hardness, Black Walnut: 1010

ENGINEERED FLOORING
Widths: 4”–11” (True Face Widths – not fractional)
Lengths: 2’–12’ bundles
Milling Profile: Tongue and Groove; end matched
Wear Layer (also called Lamella or Veneer layer): 
  3/4” Flooring: 4.5mm or 0.18” rounded
  5/8” Flooring: 3.7mm or 0.15” rounded 
  1/2” Flooring: 2.7mm or 0.11” rounded

Additional specifications are available from your salesperson.